English  -  Español

Forum


Forums have been closed.
We have not deleted them for historical reasons.

New comments will be in selected pages of Chronojump website.




 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Chronojump 1.4.9

12-01-2014, 01:17 AM
Post: #1
Chronojump 1.4.9
Chronojump 1.4.9 fixes small bugs in previous version:
  • Updated Chronopic Windows driver
  • Fixed crash since 1.4.8 on creating multiple persons in blank database
  • Files are closed better in order to fix problems with low resources machines
  • Jumps: Statistics / Subtraction between tests working again (was failing in 1.4.8)
  • Encoder: Fixed problems on analyze with inertial machines
  • Encoder: Now inertia moment calculation can be called n times without closing the window
  • Encoder: Fixed Neuromuscular Profile table shows now mm for ranges
  • Encoder: Fixed analysis single, curves num combo when person changes
  • Encoder: Default encoder capture is 30 seconds now (was 10)
  • On start, the splash window ends safely


Translations and documents
  • Updated tanslations: Finnish, Czech
  • Updated English Manual


If you have any problem with this version, just reply this thread. Thanks for your cooperation.
Find all posts by this user
12-08-2014, 12:01 AM
Post: #2
RE: Chronojump 1.4.9
To report a software problem.
I used chronopic with 3 photocells.
Are in RUN mode in the intervallic RUN -TEST by time - Limited by 3
At one point, the program crashes.
Using windows xp


Attached File(s)
.txt  log_chronojump_old.txt (Size: 43.65 KB / Downloads: 1)
Find all posts by this user
12-08-2014, 05:22 AM
Post: #3
RE: Chronojump 1.4.9
(12-08-2014 12:01 AM)Nicola Wrote:  To report a software problem.
I used chronopic with 3 photocells.
Are in RUN mode in the intervallic RUN -TEST by time - Limited by 3
At one point, the program crashes.
Using windows xp

Hello Nicola

Thanks for your feedback, and sorry for the inconvenience, we want a solid software and all the help is appreciated.
Unfortunately, the log you send us is not Ok. You have not followed the exact procedure in:

Help / Documents / chronojump_crash.pdf

It seems that the log you sent us corresponds to opening Chronojump when Chronojump is already opened.


I have done several tests trying to reproduce your error without luck, but Xavier Padullés will try it further this week.

Let me ask a question: It crash to you everytime you try do do this test, or it crashed one time and you cannot reproduce it (make it crash again) ?

Thanks again, if it crashes for us or if you or other user sends us a valid log, then we will fix it fast.

Cheers.
Find all posts by this user
12-08-2014, 05:27 AM
Post: #4
RE: Chronojump 1.4.9
Hello again.

Maybe your USB cable is not Ok.

Check if Chronopic lights change On/Off when you touch it a little bit. They are NOT supposed to change when cable is touched.
Find all posts by this user
12-15-2014, 07:50 AM
Post: #5
RE: Chronojump 1.4.9
The error is repeated every time I use the function BY TIME while you adjust the function by laps

(Chronojump:2620): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(Chronojump:2620): libglade-WARNING **: unknown attribute `swapped' for <signal>.
Changing!PRE timeLast: 4.03125, timerCount: 4.828125, timeAccumulated: 4.03
POST: timeLast: 0.798125, timerCount: 4.828125, timeAccumulated: 4.83
Changed!
Changing!PRE timeLast: 0.798125, timerCount: 8.453125, timeAccumulated: 4.83
POST: timeLast: 3.623125, timerCount: 8.453125, timeAccumulated: 8.45
Changed!
SQL ON
INSERT INTO tempRunInterval (uniqueID, personID, sessionID, type, distanceTotal, timeTotal, distanceInterval, intervalTimesString, tracks, description, limited, simulated, initialSpeed)VALUES (NULL, 1, 1, 'byTime', 200, 11.685625, 100, '4.03125=7.654375', 2, '', '10T', -1, 0)
SQL OFF
Deleted one event out of time
SQL ON
INSERT INTO runInterval (uniqueID, personID, sessionID, type, distanceTotal, timeTotal, distanceInterval, intervalTimesString, tracks, description, limited, simulated, initialSpeed)VALUES (NULL, 1, 1, 'byTime', 100, 4.03125, 100, '4.03125', 1, '', '4.03125T', -1, 0)
SQL OFF
SQL ON
Delete FROM tempRunInterval
SQL OFF
cantouch1
sensitiveGuiEventDone start sensitiveGuiEventDone default
sensitiveGuiEventDone end cantouch3
dyingrun interval accepted
From execute/run.cs
MANAGE!!!!
MANAGE(b)!!!!
MANAGE(2)!!!!
MANAGE(3)!!!!
Changing!PRE timeLast: 0, timerCount: 3.140625, timeAccumulated: 0
POST: timeLast: 3.140625, timerCount: 3.140625, timeAccumulated: 3.14
Changed!
SQL ON
INSERT INTO tempRunInterval (uniqueID, personID, sessionID, type, distanceTotal, timeTotal, distanceInterval, intervalTimesString, tracks, description, limited, simulated, initialSpeed)VALUES (NULL, 1, 1, 'byTime', 100, 3.140625, 100, '3.140625', 1, '', '10T', -1, 0)
SQL OFF
Changing!PRE timeLast: 3.140625, timerCount: 4.1875, timeAccumulated: 3.14
POST: timeLast: 1.0475, timerCount: 4.1875, timeAccumulated: 4.19
Changed!
Changing!PRE timeLast: 1.0475, timerCount: 8.078125, timeAccumulated: 4.19
POST: timeLast: 3.888125, timerCount: 8.078125, timeAccumulated: 8.08
Changed!
SQL ON
INSERT INTO tempRunInterval (uniqueID, personID, sessionID, type, distanceTotal, timeTotal, distanceInterval, intervalTimesString, tracks, description, limited, simulated, initialSpeed)VALUES (NULL, 1, 1, 'byTime', 200, 10.169375, 100, '3.140625=7.02875', 2, '', '10T', -1, 0)
Changing!PRE timeLast: 3.888125, timerCount: 8.15625, timeAccumulated: 8.08
POST: timeLast: 0.0762499999999999, timerCount: 8.15625, timeAccumulated: 8.16
Changed!
SQL OFF
Deleted one event out of time
SQL ON
INSERT INTO runInterval (uniqueID, personID, sessionID, type, distanceTotal, timeTotal, distanceInterval, intervalTimesString, tracks, description, limited, simulated, initialSpeed)VALUES (NULL, 1, 1, 'byTime', 100, 3.140625, 100, '3.140625', 1, '', '3.140625T', -1, 0)
SQL OFF
SQL ON
Delete FROM tempRunInterval
SQL OFF
cantouch1
sensitiveGuiEventDone start sensitiveGuiEventDone default
sensitiveGuiEventDone end cantouch3
dying
Find all posts by this user
12-16-2014, 03:42 AM
Post: #6
RE: Chronojump 1.4.9
Thank you Nicola, we found the problem and we are fixing it now.

Soon we will see a new version of the software: 1.4.10 fixing this

Thanks again.
Find all posts by this user


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

CHRONOJUMP-BOSCOSYSTEM - free software - open hardware - reliable - affordable
^ Back to Top