Chronojump 1.4.4 - Printable Version

Chronojump 1.4.4 - Printable Version

+- Chronojump English Forum (http://forum.chronojump.org)
+-- Forum: Software and hardware (/forumdisplay.php?fid=1)
+--- Forum: Software Chronojump (/forumdisplay.php?fid=2)
+--- Thread: Chronojump 1.4.4 (/showthread.php?tid=1774)

Chronojump 1.4.4 - xavi - 06-18-2014 12:33 AM

Chronojump 1.4.4 has been published! (2014-June-17)

Backup database:
Important: if you are an encoder user, we recommend you to backup the full database before update. Many improvements have been done on signals / curves tables. If there's any problem with update and you made the backup, it will be easy to fix. Proceed as follows:

Before installing new version, open Chronojump 1.4.3
Session menu / preferences / Open database folder
go up in your file manager one time and you will see the folders: "database", "encoder" and "multimedia". Copy the three folders to another place (eg. pendrive)

Download here:

Major improvements

Lots of improvements on graphical interface. The biggest is at start: 4 modes are shown:
Jumps, Runs, Power, Other. Shown in nice graphs. User can switch between modes
Now Signals are more connected to curves:
- Same curve cannot be saved two times
- Checkboxes on Capture tab to easy save / delete curves
- Display saved curves on barplot at capture tab
- Deleting a signal deletes it's related curves
Encoder graphs are four times faster now
Copy database can also copy encoder data and multimedia (photos and videos)

Minor improvements

Contacts
- Added DJa graph
- IUB renamed "Arms Use Index"
- Contacts stats graph dialog can be maximized
Encoder
- Mean power is shown on curve selection
- Load signal/curve shows now the laterality "R/L"
- Encoder Load signal works accepts on 'enter' or double click on treeview
- Encoder analysis cross shows line fit. Predicts maximum power and the load needed for this power. Writes also the function, R^2, Adjusted R^2 and p-value
- Shown accuracy warning on conical machines. Also message: "Start fully extended on inertial machines" is more visible now.
- Added Neuromuscular profile guidelines
- Encoder bells (feedback) moved to main window
- Export session (.csv) says now: "Encoder data is not exported"
- Analyze Cross variables without overlapping numbers. Data is shown nicely now
- Preferences: "no translate graphs" on Preferences / other (partial for fix translation of graphs on Greek)
Other
- Easier chronopic connection. Don't need to open Chronopic window and there open another window. All is done in the same window.
- All windows can be closed fast pressing ESC button (all but main Window)
- Better message on chronopic-firmwarecord
- Updated English manual: Added info on importing persons from CSV

Fixed bugs

Contacts
- Fixed error on jumps, runs selection on new GUI since 1.4.2. This affected to user created tests and RSA tests.
- Fixed random crash on cancelling contact tests (jumps, runs)
- Improvements on sensitivity on cancel finish contact events. Sometimes when cancel an event that has not started yet (user is outside platform and should be inside), window was irresponsive
- Fixed Shetty CMJ power formula calculation
Encoder
- Fixed error in weight display in curves analyze table
- Fixed problem on button encoder_analyze that was active when no curves or person where selected
- Delete signals / curves from ask confirmation if askDeleteion is selected on preferences
- Fixed encoder: jumps height when a jump is badly executed with a force < 0 at the beginning
- Fixed error that says: "Encoder connected" when it was not connected yet
- Fixed crash when USB cable is disconnecting while receiving data
- Encoder Analyze. Fixed crash on sqlite open/close multiple times in a foreach
- Neuromuscular profile is working again
Other
- Now on Linux and on MacOSX, Chronojump cannot be opened two times (two instances at the same time)
- EncoderCaptureOptions opened/closed fast on start. Now is not shown

Pending bugs

Camera is not working on MacOSX.

Updated Czech translation.