(07-19-2011 04:10 AM)Martin Wrote: [ -> ]Sorry, I used the wrong term (data, not date).
I prefer to draw a dispersion graph, where the X variable will be the test date. This is not possible in all settings, and selecting a date is not possible at all.
ok, understood now. Will be done in near future:
https://bugzilla.gnome.org/show_bug.cgi?id=654826
Thanks
(07-19-2011 07:40 PM)xavi Wrote: [ -> ] (07-19-2011 04:10 AM)Martin Wrote: [ -> ]Sorry, I used the wrong term (data, not date).
I prefer to draw a dispersion graph, where the X variable will be the test date. This is not possible in all settings, and selecting a date is not possible at all.
ok, understood now. Will be done in near future:
https://bugzilla.gnome.org/show_bug.cgi?id=654826
Thanks
Great, I look forward to it.
Another question: I see that one can test reaction time by using a light sensor. Can we use a sound from the computer as stimulus, and how to set this up in the software ?
(07-19-2011 09:15 PM)Martin Wrote: [ -> ]Another question: I see that one can test reaction time by using a light sensor. Can we use a sound from the computer as stimulus, and how to set this up in the software ?
A computer is not suitable to produce stimulus because it's not reliable on the exact moment that has to be produced. It will be done by the Chronopic with an attached Buzzer. We will develop this as we planned on mid June:
https://bugzilla.gnome.org/show_bug.cgi?id=652856
Here you can see other hardware we are developing and hopefully available soon:
https://bugzilla.gnome.org/buglist.cgi?p...t=hardware
(07-19-2011 09:38 PM)xavi Wrote: [ -> ]A computer is not suitable to produce stimulus because it's not reliable on the exact moment that has to be produced. It will be done by the Chronopic with an attached Buzzer. We will develop this as we planned on mid June:
https://bugzilla.gnome.org/show_bug.cgi?id=652856
Here you can see other hardware we are developing and hopefully available soon:
https://bugzilla.gnome.org/buglist.cgi?p...t=hardware
Hi Xavi,
Reading back in the information I read that you had planned the buzzer to be ready mid june. How far are you ?
I remember you did have a flexible contact mat. I bought one that functions very well. only problem is that it is too big for the function I look for. Therefore, would it be possible to produce a small size (10 x 10 cm) flexible contact mat ?
Cheers,
Martin
Hello Martin
Now we are so busy in encoder stuff. Today I reactivated the buzzer thing again because I saw your post. If we find some time is really easy, we already bought the needed electric components. Thanks for asking.
Abouth the flexible platform, we don't sell it anymore because some people have it and it works really good but some people have problems in detection. We changed platforms of the few people who told us that they don't work as expected. If yours work nice, continue with it, you will like it,but if you experience any problem just tell us.
Thanks again